Loveland & Johnstown Grand Rental Station

The MK Diamond MK-100-24 Magnum is a heavy duty wet tile saw. Equipped with a strong 1 ½ hp motor, a built in water distribution system that supplies water to both sides of the blade, a variable height cutting head which allows for plunge cutting, and a covered linear guide bar system to provide precise cutting on the entire length of the cut. The MK-100-24 Magnum will cut tile up to 24” in length and up to 18” diagonally.

The Bostitch SX150BHF-2 18GA Narrow Crown Finish Stapler is designed for the professional. Driving 7/32" narrow crown staples from 1/2" to 1 1/2" in length. The oil-free design requires no maintenance and prevents stains on work surfaces, while the swivel air fitting with filtered air inlet increases maneuverability and improves durability.

The Bosch HS1918 is a 6" x 25" SDS Max Floor Scraper that will fit any electric chipping hammer that accepts the SDS Max shank. Works great for removing tile, mastic, linoleum, grout, or other hard to remove materials.

The Bon Tools 24-207-B10 Carpet Trimmer is an all steel design with a rubber grip handle. The blade holder can be reversed to make cuts next to the wall. Adjusts in and out for different heights. Makes cutting carpet easy!

The Bostitch MIIFN is a high speed mallet actuated pneumatic hardwood floor nailer designed for increased productivity. The extra wide composite base plate is for added stability. Equipped with a long reach handle for improved comfort and control.

 

The Milwaukee 6497 Electric 10" Compound Miter Slide Saw is loaded with features like a top-mounted bevel lock, a large flip fence on the left side, and a great arbor lock for quick blade changes. The machined slide mechanism has dual offset hardened steel guide tubes to allow precise cutting performance, while the miter mechanism allows for fine adjustment within 1 degree, the miter table rotates on roller bearings rather than metal stampings for smooth operation.

Great for quickly burnishing large surface areas to a high gloss. The flexible pad driver follows contour of uneven floors. Powder coat finish resists oxidation and cleans easily. Durable, rugged cast aluminum alloy housing. 13hp Kawasaki with electric start for plenty of power.

Robust, dependable clean- even in the most noise-sensitive locations
100% water recovery- even in 180 degree turns
Top of the line results in any application, thanks to powerful scrub motor and exceptional down pressure

The MK-370EXP features a Powerful high-torque motor with a maintenance-free, self-lubricating pinion and gear-box assembly. The tilting head allows for precise 45º miter cuts and a Variable height cutting feature allows for plunge cutting up to 2". The 370EXP has a sliding aluminum die-cast cutting table that rips 18" tile and 13" on the diagonal. The 3/4" diameter chrome-plated linear guide-bar system and single piece zinc-plated steel frame provide rigidity, strength and durability. A simple, hinged blade guard enables easy blade changes and the removable thermoplastic water reservoir makes for easy cleaning and maintenance of the saw. This item comes with a heavy duty on/off switch, built-in water pump receptacle, and 7" diamond blade & submersible water pump included.

7" GW1 Dri Diamond Grinding Disc® is for fast removal of mastic, thin sets, & paint build up on concrete, masonry, stone and similar materials.

Great for cleaning stairs, upholstery, and automobiles   

Patented self-adjusting, self-leveling brush and vacuum shoe for easy cleaning of all carpet lengths and uneven floors plus longer brush life. Optional accessories attaches to back of unit for cleaning upholstery, stairs, etc. Handle adjusts to operator height and folds down for easy storage. Patented lift-off bucket with bladder makes filling and empltying incredibly easy. See-through recovery dome. Side extension for cleaning right to baseboards. Upright- mounted motor and intercooler system combine for long-lasting operation

Drywall banjo is used to apply drywall tape and drywall mud to drywall sheet seams. Banjo holds drywall mud in a compartment and one side of tape passes through before being applied to the wall

6' aluminum handle is used to connect to a bull float to float or smooth out freshly placed concrete. Handle a male and female end that can easily connect to other handles

12" Carpet Shear is a tool for cutting and shaping carpet

JR Power Stretcher Kit is for stretching and flatteneing of carpet

Knee Kicker is for stretching and flattening of carpet

Floor Tile Cutter cuts various sizes and shapes of ceramic tile

The AN2030 by Castex is a 2 gallon upholstery cleaner, extractor with hand tool. Great  for home & commercial use, auto detailing, upholstery & spot cleaning. Easy Transport & Storage.

Nobles Typhoon EV is a 15 gallon wet/dry vacuum. Featuring an innovative hinged top vac head for easy access to the recovery tank and float shut off assembly. Made of lightweight polyethylene and has a built in handle for easy transport. This vacuum is great for water clean up.

The MV-1300-OMEV by Mi-T-M is a powerful wet/dry vacuum. Featuring a high impact construction canister with industrial grade wheels. Filter eliminates airborne particles through exhaust.

Tennant Nobles, Cyclone Plus, 3 Speed, Air Mover, Carpet Blower, Reduces Drying Time Of Wet Or Damp Carpets, Floors & Upholstery, Heavy Duty Construction, Power Cord Included

Tennant Nobles, 4 Gallon, Marksman 412 Self Contained Extractor, Cleans Carpets Quickly & Effectively, 65 PSI Pump Breaks Down Solids While A 1500 RPM Brush Loosens Soil From Carpet For Quick Removal, Powerful Vacuum Motor Extracts Dirt & Water From The Carpet, Leaving The Carpet Clean & Fresh, Features 13" Cleaning Path, 4 Gallon Solution Tank, Lift Off Recovery Tank & A Folding Handle With Multiple Positions For Convenient Transport & Storage