Loveland & Johnstown Grand Rental Station

60" Bobcat Sweeper attachment for a Skid Steer. Sweep, collect, and dump dirt and other debris with the sweeper attachment. When operating the sweeper, poly bristles deposit debris in the sweeper bucket to be dumped when full, eliminating the need for multiple clean-up attachments.

Unmatched visibility enables you to do more with the Bobcat® T550 compact track loader. With impressive tractive effort, breakout force and pushing power, the T550 radius lift path machine is ideal for grading and dirt work.

The Model 65XP is a powerful, compact unit that makes a great rental machine. A 6 x 12-inch wide chipper throat opening is nearly twice the size of most competitive units offered. The Model 65XP is highly maneuverable, and has a fast feed rate that will easily keep two people busy feeding it.

Outback® Brush Cutter / High Weed Mower cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter and other problem vegetation at the rate of 2/3 acre per hour. Powered by a 12.5 HP B&S Intek IC engine.

The powerful MK-2000 brick saw features include a unique and innovative open-back design allowing large material to be easily cut. The cast aluminum blade guard has stainless steel water tubes that will not bend or rust. The blade shaft assembly is built with sealed, permanently lubricated, heavy-duty bearings for long maintenance free life. The recoil spring return cutting head makes plunge cutting quick and easy.

The Husqvarna Soff-Cut 150 saw is designed for residential and light commercial applications. The lightest gas saw in the Soff-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition, the low-dust blade block system allows the saw to cut dry, and it controls the debris for easy cleanup.

Key Words: Concrete, Wet Concrete, Soff, Soft, Soft-Cut, Control Joint Saw

Save time and back ache this winter by renting this 8.5hp snow thrower. 26” wide and takes all of the work out of moving snow.  

The Toro 30” stand on Aerator boasts a powerful Kawasaki V-Twin engine with integrated hydraulics that follow the contours of the ground to pull even plugs over hills and soft ground. It applies up to 1,200 lbs of down pressure on the tine to pull up to 5” cores, and operators can finely tune the hydraulic system to pull any length of plug on the fly. Electronic foot pedal controls also allow the operator to raise the lower the tines instantly for quick zero turn maneuvers without taking their hands off the controls. In addition, the floating operator platform isolates the operator from vibrations for an exceptionally smooth ride. 

Bobcat's 30” Auger is great for digging holes and can attach to either a full size skid steer or even a compact walk-behind skid steer using a auger drive attachment. This auger is 48” over all length & has 2-9/16” round collar. Made of heavy duty cast steel it is durable enough to withstand any construction or utility project in even the toughest ground conditions.

The Husqvarna 327PT5S is a robust pole saw with telescopic tube that extends out up to 13'. The versatile cutter head makes it easy to reach even dense trees and bushes without using a ladder or cherry picker. Low weight, good balance and rear-mounted engine provide a comfortable working position and reduced exhaust fumes. The slim cutter head has adjustable and automatic chain lubrication.

The Weed Dragon Torch Kit comes equipped with a flame adjusting needle valve and a flint striker. Perfect for natural, organic weed control around the home, garden and small acreages. The Weed Dragon quickly hooks up to any refillable propane tank (20 lb. barbeque cylinders work great) and even comes with a hand tighten tank fitting (no need for a wrench). Used properly, the Weed Dragon is safe and easy to operate and is a great tool to reduce or eliminate herbicide use where children and pets could be exposed. Flame weeding is a USDA approved organic weed control method. The Weed Dragon is proudly made in the U.S.A.

The Milwaukee 6497 Electric 10" Compound Miter Slide Saw is loaded with features like a top-mounted bevel lock, a large flip fence on the left side, and a great arbor lock for quick blade changes. The machined slide mechanism has dual offset hardened steel guide tubes to allow precise cutting performance, while the miter mechanism allows for fine adjustment within 1 degree, the miter table rotates on roller bearings rather than metal stampings for smooth operation.

Able to hold 8 cu. ft. worth of concrete.

This versatile Bobcat S150 loader gives the operator great visibility with the low-profile lift arm design. It includes such standard K-series features as engine and hydraulic systems that monitor functions and shut down the machine to prevent catastrophic failure. This rugged, state-of-the-art loader will save you time, effort and money on every job.

Everything that makes chain saws the preferable method in cutting concrete, stone and masonry is found in a powerful 6.4 hp (94cc) saw. Deep straight cuts up to 12" and square corners with ease of use and dependable performance to match

Well-balanced design allows high productivity. M1 Cutters have 3 cutting surfaces on each tooth - quick & easy change. adjustable handle

4-wheel drive, powered reverse, 2 cutting speeds, 2 transport speeds. Easy to use - choose depth, speed and begin cutting!

Don’t let the small size fool you. The BC600XL is a heavy duty disc-style chipper that can process material up to 6” in diameter. A 27 hp/20 kW Kohler Command Pro engine and AutoFeed II® system maximize productivity. The bottom feed stop bar is strategically located to make it possible for the operator’s leg to strike the bar and shut off the feed whether intentionally or automatically in an emergency situation

Little Wonder Gas Hedge Trimmers feature a commercial grade 2-cycle engine with case-hardened gears. Dual reciprocating blades provide a scissor-like cut that is faster and cleaner, protecting plants from damage. Gas trimmers cut 3500 cuts per minute up to 1 inch branches

Little Wonder Electric Hedge Trimmers are light weight yet cut through 1/2 inch branches quickly and cleanly. Dual reciprocating blades provide a scissor-like cut that is faster and cleaner, protecting plants from damage. Trimmers feature well balanced handles for all day use with no emissions to inhale. The 4.5 amp electric motor runs quieter, provides high-speed cutting action of 2700 cuts per minute, and features a safety mechanism that stops blade cutting action within a half second when released

Little Wonder Pro Edgers feature dual drive belts to give you more belt grip capable of edging up to 90 feet per minute. Edgers establish crisp, distinct edges up to 3 inches deep. With the independent belt engagement, operator can set cutting depth prior to engaging the blade, giving you better results especially at start up

20 Ton Fast Cycle Log Spliiter

30 Ton Horizontal Log Splitter

K3000 Wet is made for cutting indoors and outdoors. A powerful, versatile electric cutter equipped with DEX, a wet cutting kit, to minimize dust and slurry. It easily adjusts between cutting different matierals

Classen power rakes are portable, compact and dethatch a 20" swath with ease. Folding handles make them excellent for rental use. Rakes feature a more accurate 5-position, single action height adjustment. Heavy-duty, greasable bearings with cast-iron housings provide trouble free dethatching. With the TR-20H you will have your lawn dethatched in no time.